These are 18x9 SOTA Novakanes that I sent to OMF to put the simulated bead ring on them. They are a zero offset so right now I have some rubbing with the 1.5" rpg collars and 37x12.50's. I can turn lock to lock on flat ground but flexing is not doable yet... It's different, which I love. The bottom picture was before I reinstalled the fender liner and flare.
Husky wheel liners are NOW available.... part # 79141. They will start shipping out next week. You will have to call husky, they're not on website yet.
Are we talking 17's? If so Roti is 38lbs, CON 6 is 33lbs. Innov8's are priced pretty good but they're more built for strength than weight saving. At about 31lbs per wheel you won't find one stronger. $490 in raw machined. Caps are $65 each if wanted. These prices do not include shipping.
Maybe silly question but just making sure. I ended up with 20x35’s. I like the way BF’s stock tires rode so hoped the 20’s would too, which is close. What’s the best psi to follow? Vehicles psi at 38 or tire psi at 65?
Run 38psi. The 20" BFG has a much higher load rating and smaller sidewall so it will naturally ride rougher.
Agree with 38psi. Will drive like a truck wagon at 65psi without a load..assuming your not hauling a load?