WHEELS....

Discussion in 'Exterior' started by wparish81, Feb 5, 2017.

  1. Boosh

    Boosh Member

    Posts:
    8
    Likes Received:
    4
    Joined:
    Jul 22, 2017
    These are 18x9 SOTA Novakanes that I sent to OMF to put the simulated bead ring on them. They are a zero offset so right now I have some rubbing with the 1.5" rpg collars and 37x12.50's. I can turn lock to lock on flat ground but flexing is not doable yet... It's different, which I love.
    The bottom picture was before I reinstalled the fender liner and flare.

    image.jpg

    image.jpg
     
    RibRoy likes this.
  2. Lonnie

    Lonnie Member

    Posts:
    19
    Likes Received:
    10
    Joined:
    Nov 20, 2016
    Husky wheel liners are NOW available.... part # 79141. They will start shipping out next week.
    You will have to call husky, they're not on website yet.
     
  3. htsai14752

    htsai14752 Active Member

    Posts:
    27
    Likes Received:
    4
    Joined:
    Oct 28, 2017
    Post your pictures when you get your wheels on.
     
  4. htsai14752

    htsai14752 Active Member

    Posts:
    27
    Likes Received:
    4
    Joined:
    Oct 28, 2017
    How much do these wheels weigh?
     
  5. htsai14752

    htsai14752 Active Member

    Posts:
    27
    Likes Received:
    4
    Joined:
    Oct 28, 2017
  6. htsai14752

    htsai14752 Active Member

    Posts:
    27
    Likes Received:
    4
    Joined:
    Oct 28, 2017
    what's also the least expensive forged wheel out there?
     
  7. CUSTOMWHEELS4U

    CUSTOMWHEELS4U Supporting Vendor Supporting Vendor

    Posts:
    32
    Likes Received:
    12
    Joined:
    May 19, 2016
    Location:
    Reno, NV
    Are we talking 17's? If so Roti is 38lbs, CON 6 is 33lbs.

    Innov8's are priced pretty good but they're more built for strength than weight saving. At about 31lbs per wheel you won't find one stronger.
    $490 in raw machined. Caps are $65 each if wanted. These prices do not include shipping.
     
  8. juan banuelos

    juan banuelos Member

    Posts:
    21
    Likes Received:
    9
    Joined:
    Nov 29, 2017
    Here’s mine on RRW wheels matte bronze 17x8.5 factory offset & tires.

    BB7CC72C-EBB3-48B5-A5DC-7A0FDD1CB66D.jpeg

    9E8DCE3E-B92F-4E4E-BBB8-0F922A88DB9C.jpeg
     
  9. Plasterman

    Plasterman Full Access Member

    Posts:
    70
    Likes Received:
    12
    Joined:
    Sep 28, 2017
    Maybe silly question but just making sure. I ended up with 20x35’s. I like the way BF’s stock tires rode so hoped the 20’s would too, which is close. What’s the best psi to follow? Vehicles psi at 38 or tire psi at 65?
     
    Last edited: Jan 1, 2018
  10. CUSTOMWHEELS4U

    CUSTOMWHEELS4U Supporting Vendor Supporting Vendor

    Posts:
    32
    Likes Received:
    12
    Joined:
    May 19, 2016
    Location:
    Reno, NV
    Run 38psi. The 20" BFG has a much higher load rating and smaller sidewall so it will naturally ride rougher.
     
  11. Plasterman

    Plasterman Full Access Member

    Posts:
    70
    Likes Received:
    12
    Joined:
    Sep 28, 2017
    Thanks!
     
  12. Jeff D

    Jeff D Full Access Member

    Posts:
    192
    Likes Received:
    58
    Joined:
    Dec 31, 2017
    Agree with 38psi. Will drive like a truck wagon at 65psi without a load..assuming your not hauling a load?
     
  13. Jeff D

    Jeff D Full Access Member

    Posts:
    192
    Likes Received:
    58
    Joined:
    Dec 31, 2017
    IMG_0669.JPG
     
  14. Plasterman

    Plasterman Full Access Member

    Posts:
    70
    Likes Received:
    12
    Joined:
    Sep 28, 2017
    For daily driving. No load for now. Thanks for the help.
     

Share This Page