Supplemental alarm for 2018 Raptor

Discussion in 'Audio/Video/Electronics' started by Bruce CREG, May 14, 2018.

Page 2 of 2
  1. Mar 27, 2019 at 6:00 PM #16
    mattio

    mattio Member

    Posts:
    7
    Likes Received:
    2
    Joined:
    Mar 8, 2017
    Location:
    Houston, TX
    Installed mine and it hasn't worked yet for 3 days... if it had a learning period... no shock alarm will sound, adjusted sensitivity all the way in each direction... nothing
     
  2. Mar 29, 2019 at 8:41 AM #17
    mattio

    mattio Member

    Posts:
    7
    Likes Received:
    2
    Joined:
    Mar 8, 2017
    Location:
    Houston, TX
    so... determined the mounting location for the shock sensor is key. decided to make my own bracket similar to the GOLDEN bajamod bracket. Shock works now when I bump the cab with my palm. I can pull the front door handles and it with chirp... I have the setting set to full sensitive (all the way clockwise). [​IMG]
     
  3. Jul 22, 2019 at 10:23 AM #18
    XPLOR

    XPLOR New Member

    Posts:
    3
    Likes Received:
    0
    Joined:
    Jul 10, 2019
    Location:
    New Mexico
    I used two zip ties, one on the top and one on the bottom to anchor it to the white module. Works great! I get the chirp with a pull of the door handle and full blown alarm with a pound. Thanks Mattio for your posts! They helped me a lot! Alarm_LI.jpg
     
  4. Jul 22, 2019 at 10:51 AM #19
    XPLOR

    XPLOR New Member

    Posts:
    3
    Likes Received:
    0
    Joined:
    Jul 10, 2019
    Location:
    New Mexico
    I purchased the BLUE Super Bright; however, the connector does not fit the JS7Z-19A361-A module. :confused: Just so others know...
     
  5. Aug 5, 2019 at 11:13 PM #20
    WH7

    WH7 Member

    Posts:
    22
    Likes Received:
    7
    Joined:
    Jan 22, 2019
    I made the same mistake. Got the red led with the correct plug, just haven't wired it up yet.
     
Page 2 of 2

Share This Page